Configuring Your NetComm NF10WV - Initial Steps

1. Plug NetComm NF10WV into a Power Source

1. Ensure that the power cable provided in the device packaging is connected to a power socket on the wall

2. Confirm that the device is receiving power after the power point is switched on

   • You can confirm this by checking if the status lights on the device are flashing or solid green

2. Connect to the device

1. Ensure that Wi-Fi is enabled on the device you are using to access your modem (e.g. computer/laptop/smartphone/tablet). If you are using a smartphone or tablet, you should turn off your mobile data connectivity or any hotspot connection during this process.
2. Connect to the Wi-Fi/Wireless network of the NetComm NF10WV modem on your computer/laptop/smartphone/tablet.
   1. To connect to the Wi-Fi network of the NetComm NF10WV modem, locate the Wi-Fi network name being broadcast by the modem from your device (e.g. computer/laptop), select this network, then enter the password for this network when prompted.
      1. If you are unsure of the Wi-Fi password, this will be printed on the sticker on the back of the NetComm NF10WV modem, underneath the barcodes.

PLEASE NOTE: YOU DO NOT NEED TO HAVE A WORKING INTERNET CONNECTION TO CONNECT TO THE WI-FI OF THE NETCOMM NF10WV MODEM OR ACCESS THE MODEM GATEWAY PAGE.

Alternatively, you can plug in an RJ-45 Ethernet cable from your computer or laptop to one of the four (4) yellow Eth ports on the back of the NetComm NF10WV modem.

3. Accessing the device

1. Open a web browser (e.g. Google Chrome/Internet Explorer/Mozilla Firefox/Microsoft Edge) and browse to http://192.168.20.1. If successful, a login box or window should appear asking for a username and password. Use the following details to log in:
   • Default username: admin
   • Default password: admin

If this doesn’t work, the password will be printed on the sticker on the back of the NetComm NF10WV modem. Enter this password.